DESCRIPTION

"Flag Screws" are a complete TOOL-LESS hardware solution that will eliminate managing screws and track nuts or losing them when they fall out of the board in transit. *Flag Screws are M6, a smaller size than our standard foil track hardware. We recommend purchasing RapidTrack T-Nuts along with these screws to ensure compatibility.

Package Includes:

• 4 x RapidTrack Flag Screws (M6 x 25mm)
• 4 x M6 Aluminum T Nuts
• 4 x Counter Sink Washers - For Compatibility with M8 sized Foils.

Who It's For:

"Flag Screws" are a complete toolless hardware solution that will eliminate managing screws and track nuts or losing them when they fall out of the board in transit. *Flag Screws are M6, a smaller size than our standard foil track hardware. We recommend purchasing RapidTrack T-Nuts along with these screws to ensure compatibility.

Package Includes:

1 x SS M6x25 FlagScrew1 x 6061 AL Anodized Washer

Protect your foil whether you are simply heading to the beach or heading around the world.

Sizes: Small, Medium, Large

Stainless Steel Foil Board Track "T" Nut M8 Thread Sold as 1 each

This is the hardware that slides into the track of Slingshot Foil Boards. They are used to connect Hoverglide and Phantasm foils to Slingshot Foil Boards. Paired with Slingshot Foil Mounting Hardware. 

HOVER GLIDE FOIL MOUNTING HARDWARE M8 X 25MM (SET OF 4)

Hook-In, Relax, Speed-Up

Lightweight pedestal base for all Hover Glide Foils. Quick connect your foil to your board without removing the hardware from the board.

Lightweight pedestal base with the ability to connect your foil to your board without removing the track hardware from the board. Quick foil-to-board connection without removing bolts. 4 position options for the bolt. Outer holes are quick connect, inner holes are standard holes.

Hardware pack for Each Lower Package.

These include the bolts for Front Wing to Fuse and Rear Wing to Fuse.

Have a Hover Glide mast and want to get into the new Phantasm platform? This mast-to-fuse adapter is your answer.

Now you can connect any of our Hover Glide masts to the new Phantasm Platform Fuse.

•Use the Hover Glide Mast you already own and upgrade setup to the new Phantasm foil platform.

Package Includes:Hover Glide Mast to Phantasm Fuse Adapter, Hardware

The Phantasm Jack Plate is an adapter that allows you to use your Phantasm foil with either a medium or deep Tuttle Box board. The Tuttle adapters can be moved forward or backwards on the plate, allowing for precise foil placement.

The Phantasm Jack Plate is an adapter that allows you to use your Phantasm foil with either a medium or deep Tuttle Box board. It's as simple as attaching either of the supplied medium or deep Tuttle adapters to the Jack Plate and then bolting the Jack Plate onto your Phantasm pedestal.

The Tuttle adapters can be moved forward or backwards on the plate, allowing for precise foil placement.

WHY WE MADE IT

• Allows for the use of the Phantasm foils with any medium or deep Tuttle Box board.
• Use your Phantasm foil with any Tuttle Box board

WHY YOU'LL LOVE IT

• Adds 1cm of length to your mast
• You can move the Tuttle adapter forward or back five different locations on the Jack Plate to perfectly place your foil's center of lift

Package Includes:Phantasm Jack Plate, Medium Tuttle adapter, Deep Tuttle adapter, Jack Plate to Tuttle Adapter hardware, Jack Plate to Phantasm Pedestal hardware

The Phantasm features a high-performance aircraft-grade aluminum alloy fuselage that has been shaped and designed to offer unmatched stiffness and strength.

Sport Specialty:

653 mm = Specialty Fuselage

710 mm = All Sports (except Wind Surf)

872 mm = Wind Surf

Replacement Nut for the inside of the Foil Board track system. Needed to connect the foil to our foil boards. Replacement bolts that connect your Hoverglide Foil to our Foil Boards using the track system. 

Hover Glide hardware pack for your foil spare and backup needs. Better safe than sorry! pack includes:

Package Includes:

2-M8X40mm Pedestal Bolts, 2-M6X30mm Rear Wing Screws, 2-M8X45mm Fuselage Bolts (A Position), 2-M8X50mm Countersunk Bolts (B Position), 2-M8X23mm Mast Cap Bolts (B Position), 1-M6X25mm Set Screw

Hover Glide foil hardware M8 x 75mm Titanium Bolt. For a complete parts list, see the product page for your specific foil.

*Bolts are sold individually

Bolt to connect Tuttle Adapter to Mast:
-FWind 1
-FWind 2

Transport your entire FSUP foil in one low profile, padded case. Made from a durable canvas material that is molded and will hold its shape. This case is designed specifically for easy transport and to keep your foil safe.  Securely holds all of your complete foil components; wings, mast, fuselage and hardware.  

FEATURES:

• 4 Fully Fleece Lined Wing and Component Pockets
• Tarpaulin interior for fast drying
• 2 Mesh tool Pockets
• Heavy Duty grab handles
• Heavy duty, YKK® molded zipper