***Available in May 2024***

DESCRIPTION

"Flag Screws" are a complete TOOL-LESS hardware solution that will eliminate managing screws and track nuts or losing them when they fall out of the board in transit. *Flag Screws are M6, a smaller size than our standard foil track hardware. We recommend purchasing RapidTrack T-Nuts along with these screws to ensure compatibility.

Package Includes:

• 4 x RapidTrack Flag Screws (M6 x 25mm)
• 4 x M6 Aluminum T Nuts
• 4 x Counter Sink Washers - For Compatibility with M8 sized Foils.

Who It's For: This setup extends performance in the glide zone. Perfect for super-weight riders that want to optimize their foil setup for a maximum glide without losing take-off or drop-out speed, turning, or stability.

Package Includes:
Phantasm G 1007 Front Wing, Hardware (316 Stainless Steel Torx), Neoprene Wing Cover

Who It's For:

This setup extends performance in the glide zone. Perfect for super-weight riders that want to optimize their foil setup for a maximum glide without losing take-off or drop-out speed, turning, or stability. Stabilizer Step Method Compatible.

Package Includes:

Phantasm G 1007 Front Wing, 710 Fuselage, PS 400 Stabilizer, Hardware (316 Stainless Steel Torx), Neoprene Wing Covers, Carrying Case

Features

• G 1007 FRONT WING
• PS 400 MM REAR STABILISER
• 710 MM FUSE
• BIGFOOT CONNECTION

Front Wing Dimensions

Package Includes:
PTM 899 Front Wing, PS 360 V-Tail Stabilizer, 710mm Fuse, travel case, neoprene wing covers

The PTM 899 achieves maximum glide range through a new profile design, a slightly lower "high aspect" ratio, and a balanced anhedral/wing tip twist. Eventually, gliding becomes second nature. Gaining high-end speed and glide shouldn't impact your low end. Your new goal becomes optimizing efficiency by maximizing the speed range of your foil while being flagged out. We refer to this as the "glide zone". This wing destroys the legacy"surface area" comparison method. This smaller wing will blow away any larger wing for those stuck on that old measuring method. In other words, you can get more lift, speed, glide, and turning from a wing smaller than you think. This is the wing.

Features

• PTM 899 FRONT WING
• PS 360 MM V-TAIL
• 710 MM FUSE
• BIGFOOT CONNECTION
• TRAVEL CASE AND NEOPRENE WING COVERS

Size Chart

G 900/710 LOWER PACKAGE V1

GLIDE / SPEED / CONTROL

G 900/872 LOWER PACKAGE V1

GLIDE / SPEED / CONTROL

G 1000/710 LOWER PACKAGE V1

GLIDE / SPEED / CONTROL

Package Includes:

Phantasm G 1000 Front Wing, 710 Fuselage, PS 400 Stabilizer, Hardware (316 Stainless Steel Torx), Neoprene Wing Covers, Carrying Case.WHY WE MADE IT

Hardware pack for the Phantasm Carbon Mast V1

Package Includes:

Mast/Fuse Hardware SS316 3 x pcs M6 x 25 mm Socket Head
Phantasm Mast Barrel Nuts x 3

Protect your foil whether you are simply heading to the beach or heading around the world.

Sizes: Small, Medium, Large

Stainless Steel Foil Board Track "T" Nut M8 Thread Sold as 1 each

This is the hardware that slides into the track of Slingshot Foil Boards. They are used to connect Hoverglide and Phantasm foils to Slingshot Foil Boards. Paired with Slingshot Foil Mounting Hardware. 

PHANTASM STABILIZER 400MM V1 (280 CM2)

PUMP / CARVE / STABILITY

PHANTASM STABILIZER 325MM V1 (202 CM2)

SNAP / SPEED / LIVELINESS

Package Includes:

PS 325 Rear Stabilizer, Hardware (316 Stainless Steel Torx)

PFI 835MM FRONT WING V1 (2030 CM²LA)

STABILITY / VERSATILITY / PROGRESSION

PFI 928MM FRONT WING V1 (2389 CM²LA)

EARLY LIFT / LIGHT WIND / PROGRESSION

 PFI 730MM FRONT WING V1 (1456 CM²LA)

VERSATILITY / STABILITY / CARVING

Package Includes:

PFI 730 Front Wing

PFI 730MM FRONT WING V1 (1456 CM² LA)

E 990 (1800 CM2) FRONT WING V1

Fun / Easy / Progression

Built to cruise, our medium-aspect, carbon-fiber E Series wings will get you up on foil early with confidence inspiring stability. From wake to wing to surf, our E Series wings make foiling easy across multiple sport categories.

Package Includes:

Phantasm E 990 Front Wing, Hardware (316 Stainless Steel Torx), Neoprene Wing Cover

Package Includes:

PTM 1001 Front Wing, Hardware (316 Stainless Steel Torx)

E 866 (1550 CM2) FRONT WING V1

Fun / Easy / Progression

Package Includes:

Phantasm E 866 Front Wing, Hardware (316 Stainless Steel Torx), Neoprene Wing Cover CM2) FRONT WING V1

The Phantasm Technical Mastery (PTM) 684 Front Wing was developed by our design team using feedback from Phantasm riders worldwide. Riders who are looking for speed and agility, but still want great confidence-inspiring stability should look no further than the PTM 684.

Package includes:

PTM 684 Front Wing, Hardware (316 Stainless Steel Torx)

WHY WE MADE IT

We built the PTM 684 Front Wing to give riders more performance while still maintaining stability and comfort.

WHY YOU'LL LOVE IT

•Riders will enjoy faster speeds, more agility and confidence inspiring stability
•The PTM 684 is the next step up after you have mastered the 633 wing.
•The Phantasm is modular—enjoy compatibility across the whole suite.

Hardware pack for Each Lower Package.

These include the bolts for Front Wing to Fuse and Rear Wing to Fuse.

Have a Hover Glide mast and want to get into the new Phantasm platform? This mast-to-fuse adapter is your answer.

Now you can connect any of our Hover Glide masts to the new Phantasm Platform Fuse.

•Use the Hover Glide Mast you already own and upgrade setup to the new Phantasm foil platform.

Package Includes:Hover Glide Mast to Phantasm Fuse Adapter, Hardware

The Phantasm Jack Plate is an adapter that allows you to use your Phantasm foil with either a medium or deep Tuttle Box board. The Tuttle adapters can be moved forward or backwards on the plate, allowing for precise foil placement.

The Phantasm Jack Plate is an adapter that allows you to use your Phantasm foil with either a medium or deep Tuttle Box board. It's as simple as attaching either of the supplied medium or deep Tuttle adapters to the Jack Plate and then bolting the Jack Plate onto your Phantasm pedestal.

The Tuttle adapters can be moved forward or backwards on the plate, allowing for precise foil placement.

WHY WE MADE IT

• Allows for the use of the Phantasm foils with any medium or deep Tuttle Box board.
• Use your Phantasm foil with any Tuttle Box board

WHY YOU'LL LOVE IT

• Adds 1cm of length to your mast
• You can move the Tuttle adapter forward or back five different locations on the Jack Plate to perfectly place your foil's center of lift

Package Includes:Phantasm Jack Plate, Medium Tuttle adapter, Deep Tuttle adapter, Jack Plate to Tuttle Adapter hardware, Jack Plate to Phantasm Pedestal hardware

The Phantasm features a high-performance aircraft-grade aluminum alloy fuselage that has been shaped and designed to offer unmatched stiffness and strength.

Sport Specialty:

653 mm = Specialty Fuselage

710 mm = All Sports (except Wind Surf)

872 mm = Wind Surf

The Phantasm aluminum mast is made from light and strong 7075 aircraft-grade aluminum. It is compatible with all Phantasm fuses and is 15% lighter, and 12% stronger than the regular Hover Glide mast.

Package Includes:

Phantasm Wide Mast, Pedestal Adapter, Phantasm Fuse Adapter, Hardware, Padded Mast Bag, Foil to board mounting hardware

The Phantasm aluminum mast is made from light and strong 7075 aircraft-grade aluminum.

Aluminum mast, Pedestal, Phantasm fuse adapter, Hardware (316 Stainless Steel Torx), Mast cover, Foil to board mounting hardware.

Package Includes:

Phantasm Carbon Mast, Padded Mast Cover, Pedestal, Phantasm fuse adapter, Hardware (316 Stainless Steel Torx), Foil to board mounting hardware.

Package Includes: Phantasm Carbon Mast, Padded Mast Cover, Pedestal, Hardware (316 Stainless Steel Torx), Foil to board mounting hardware.

PFI 633MM FRONT WING V1 (1270 CM²LA)

FLOAT / STABILITY / PROGRESSION

The PFI 633 Front Wing is the ultimate blend of performance and comfort. Designed to be quick, user-friendly and versatile, this is the one freeride foil wing that will help you progress to the next level.