"Flag Screws" are a complete TOOL-LESS hardware solution that will eliminate managing screws and track nuts or losing them when they fall out of the board in transit. *Flag Screws are M6, a smaller size than our standard foil track hardware. We recommend purchasing RapidTrack T-Nuts along with these screws to ensure compatibility.
Package Includes:
4 x RapidTrack Flag Screws (M6 x 25mm)
4 x M6 Aluminum T Nuts
4 x Counter Sink Washers - For Compatibility with M8 sized Foils.
"Flag Screws" are a complete toolless hardware solution that will eliminate managing screws and track nuts or losing them when they fall out of the board in transit. *Flag Screws are M6, a smaller size than our standard foil track hardware. We recommend purchasing RapidTrack T-Nuts along with these screws to ensure compatibility.
Who It's For: Advance kiters looking to transfer those skills into being advanced foilers and desire a stable yet compact platform for early take-off, effortless foot switches, spinning, dancing, and carving.
Package Includes:
Dwarf Craft V3 Board, (Foil Track Hardware not included)
The Original Compact Foil Board
Instant reaction and response from rider to the foil
Three sizes for all riders and abilities
DWARF CRAFT V3 - FLIGHT / CONTROL / PROGRESSION
THE DESIGN DIFFERENCE
The Dwarf Craft is back in its third generation and has been re-designed to optimize your foiling progression. The concave deck and beveled rails provide dynamic heel-to-toe performance with effortless turning response and touchdown rebound. Compression- molded construction and PMU top sheet increase the board's durability as well as decrease its weight. Its high surface areas combined with low volume make water starts easy while maintaining the ability to touch down on the water without pearling.
CONCAVE DECK
Concave design provides increased turning sensitivity and response, as well as more dynamic heel-toe performance. Also helps with proper foot placement as you get a feel for the contour of the deck and where the sweet spot is.
ADJUSTABLE FOIL TRACK MOUNT
The adjustable mount allows you to slide your foil forward and aft on your board to fine tune how it feels and performs based on your size, ability, and personal preference.
BEVELED RAILS
Beveled rails prevent the board from grabbing the water when you touch down, which allows you to skip off the water and keep going instead of grinding to a halt.
MULTIPLE FOOTSTRAP INSERT POSITIONS
Ride however you want. With multiple insert options you can ride whatever configuration you like: three straps, two straps, one strap, no straps, two hooks, one hook, or no hooks—you can make the choice.
CORDUROY EVA DECK PAD
This full coverage EVA deck pad is the perfect blend of comfort and traction. Its super soft on your feet yet super grippy, ensuring there are no slips, no slides, and no slices.
Who It's For: Foilers looking to pump anywhere and everywhere on all bodies of water—with or without a boat or wave. Made for the complete foiling addict who can't be bothered to wait around for the next boat ride. It's better to have it and not need it than to need it and not have it!
Package Includes:
Puddle Pumper Foil Board
The Puddle Pumper is built in a compression molded construction making it extremely durable and stiff, so that every bit of energy you put into the board translates directly to the foil, allowing you to pump for the longest distances possible. When it comes to pumping performance, a short board is key, allowing you to maximize the angle of attack of both the board and wing without concern of putting the board in contact with the water, hence the compact 3'3" length. A full EVA deck pad completes the package giving the riders plenty of surface area to get into their groove!
Who It's For: You tack, glide, and pump on a swell. You're becoming one with your foil. Now you want to out-glide your friends while making tighter turns than they thought possible. Your goal is "Total Mastery," with elegance and efficiency being the mindset you incorporate into your riding.
Package Includes:PTM 899 Front Wing, Neoprene Wing Cover, Mounting Hardware
Who It's For: This setup extends performance in the glide zone. Perfect for super-weight riders that want to optimize their foil setup for a maximum glide without losing take-off or drop-out speed, turning, or stability.
Package Includes: Phantasm G 1007 Front Wing, Hardware (316 Stainless Steel Torx), Neoprene Wing Cover
As the trend in foiling continues to move towards shorter boards, we redesigned the WF-2 soft-top foilboard to pack the same amount of surface area into a shorter 4'6" board length, making it an excellent choice for all levels of foilers.
Javelin V1 - Available in 4.0, 4.5, 5.0 and 5.5 with this Package
Description
The Javelin boom wing delivers a stunning level of power and control with simple and secure push pin boom connectivity. Featuring an ultra-compact wingspan and on-the-fly power tuning using the canopy tensioning strap to flatten or expand the wings profile. Whether you are cruising one-handed with style, riding backwinded or trying to keep the wingtips out of the water, the advantage is clear.
Features
DL 160 Dacron - Best combination making wing super light but still Durable
Push Pin Boom Connection - Super quick and simple boom connection plus you can pack wing down to small size
Canopy Tensioning Strap - Depower boom strap for on the fly adjustment as well as extending your wing per size
4x4 Canopy Tech - Lightweight yet robust canopy material
I-Fly V1 - Available in 90, 105, 120 and 140 Litres
Description
A lightweight, inflatable foil board with a large carbon-fiber foil plate, the I-Fly provides stiff and reactive foiling performance that you can take anywhere.
Features
Features include foot strap inserts, top and bottom carry handle, ¾-length deck pad, travel pack, and leash connector
Hover FPump Foil Package - 1700cm2 Foil
Description
The FPump V1 foil delivers massive amounts of lift that will have you pumping effortlessly across the water, riding the smallest of waves imaginable, foiling on the lightest wind days possible.
Package Includes
I-Fly Inflatable Board, Javelin Wing, Carbon Javelin Adjustable Boom, FPump Hover Glide foil with Quantum 100 and 42cm Stabiliser wings.
This setup extends performance in the glide zone. Perfect for super-weight riders that want to optimize their foil setup for a maximum glide without losing take-off or drop-out speed, turning, or stability. Stabilizer Step Method Compatible.
Package Includes:
Phantasm G 1007 Front Wing, 710 Fuselage, PS 400 Stabilizer, Hardware (316 Stainless Steel Torx), Neoprene Wing Covers, Carrying Case
The SlingWing V4 is the ultimate choice for riders looking for a wing to help them take their skills to the next level. Riders seeking increased control and effortless tacking with a compact wingspan for on-the-water transition or spinning on jumps. The upward lift on the nose handle provides enhanced drifting capabilities while flagging out while swell riding.
Balance, power, stability, and ease of use are the hallmark traits of the SlingWing V4's all-new high-tension canopy design. This revolutionary design enhances all elements of our flagship wing. Refinements in new materials, leading-edge design, and our high-tension canopy profile make theSlingWing V4 more balanced and easier to fly. This wing excels across all performance metrics no matter how or where you use it. Exclusive to Slingshot, it features the new SlingGrip EVA with a Click Connect handle system. The elevated pistol grip front handle delivers greater control when luffing or switching hands. These handles come on and off with a click, which makes packing for travel more compact. Soft or carbon handles can be purchased separately.
True Tension
A strategically calculated taper from the center of the LE wing to the wing tips, the True Tension Airframe delivers our new revolutionary high tension canopy medium span wing design. Offering superior balance and handing with best-in- class flex characteristics. Stiff in the front and transitioning to softer at the wing tips, the TrueTaper Airframe keeps the first third of the canopy structure smooth rigid for on-demand power while allowing wing tip twist off in gusty conditions or flag out and surf with total control.
FRAMELITE CONSTRUCTION
Utilized throughout the SlingWing V4’s airframe, this high-tenacity polyester features biaxial gridding and extensive emulsion coating, eliminating stretch in all directions while providing a more balanced feel, better power control, and stable, effortless luffing while surfing. The stiffness of FrameLite’s unique 2x2 weave structure significantly reduces elongation of the airframe and increases multi- season durability. At 160 grams per square meter, FrameLite uncompromisingly offers the optimum balance of flex, strength, stiffness, and weight.
RIGID H-GRID CANOPY CONSTRUCTION
The SlingWing V4 utilizes our new H-Grid Rigid canopy construction. We doubled our horizontal canopy paneling count by implementing a strategic seaming pattern that enables our new high-tension canopy profile. These reinforced seams and a strategic gridded canopy prevent the canopy stretch. It also eliminates catastrophic blowouts or rips in the event your foil goes through your wing or goes through the wringer in the surf.
VERSASTRUT
With its hybrid canted strut design, VersaStrut works in conjunction with HGrid Rigid Canopy Construction to control our high-tension canopy profile. It allows for less in-fill wall connection in the mid-section and direct strut-to-canopy connection toward the trailing edge. The canted forward section of the strut moves the wing further from the rider, which creates significant dampening and takes any slack out of rider input. Connecting the strut directly to the rear of the canopy yields a more direct and rapid response when pumping and distributes loads uniformly into the canopy.
SLINGGRIP ALUMINUM HANDLES
The reduced 27-millimeter diameter with dual-patterned EVA and ergonomically optimized pentagonal circumference of the SlingGrip Aluminum handles provides all-day comfort and better roll control by matching the exact shape of your grip, plus we added a little extra side wall for fingers to torque against when needed. A pistol-grip front handle allows riders to confidently luff the wing and ride swell without needing to move their hand to the leading-edge webbing handle. The angled pistol-grip gives you the ability to regulate power in the wing while luffing and keep the trailing edge up.
CLICKCONNECT
The easiest and quickest handle connection available on any wing, the ClickConnect requires no tools to mount your handles. Simply slide the handle into the connection point on the strut until it clicks. Superiorly engineered, the ClickConnect mounts are sewn around the strut to distribute load and avoid pinch points.
You ride a lot, and you are skilled at all tricks, transitions, big swell, and pumping. You are on the way to riding in a flow state. The Phantasm Stabilizer 340 Turbo-Tail is the right equipment selection at this journey stage. Following our Stabilizer Step Method will harmonize your equipment, body, and mind for new unlocked performance.
Phantasm Stabilizer 340 Turbo-Tail extends the glide range with heightened speed and enhanced maneuverability. With compact engineering, this stabilizer prioritizes optimal ROLL control, enabling you to execute tighter hard-slashing turns with more ease and control. Its design ensures pitch stability, instilling confidence even when pushing a speed limit on a swell or under power. This stabilizer unlocks your favorite front wings' glide and turning capabilities, granting you more freedom and control over your ride.
Phantasm 360mm V-Tail Stabilizer extends the glide range with heightened speed and enhanced maneuverability. Engineered with a V-Tail shape, this stabilizer prioritizes optimal YAW control, enabling you to execute tighter radius turns effortlessly. Its design ensures pitch stability, instilling confidence even when pushing a speed limit on a swell or under power. This stabiliser unlocks your existing front wings' glide and turning capabilities, granting you more freedom and control over your ride.
*Recommended with either the G and PTM Series front wings.
Developed in collaboration with foil wizard Fred Hope, this board is based on the popular Dwarf Craft but has been taken to the next level. The Hope Craft features a top-secret layup that makes it extra stiff, and incredibly reactive. The extra stiffness is a key ingredient in transferring energy from the kite, body, into the foil. Using advanced construction and cutting-edge technology, the Hope Craft V2 is the perfect choice for the most advanced and progressive riders looking to master and define the new limits of kite foiling.
The UFO changed kite foiling forever with its zero-strut design that delivers otherworldly levels of drift, upwind reach, and response. The UFO V3's FlexLITE airframe—built with 140g/m2 high-tenacity polyester—further decreases the UFO's weight without sacrificing performance or durability. With swept wingtips and an intelligent Compact Swept C canopy shape, the UFO V3 has been designed for an effortless water relaunch. Supplementing the optimised minimalism of the UFO is the new zipperless roll-top kite bag that keeps weight to an absolute minimum while maximising convenience and packability.
An well priced board and foil package featuring the Wing Craft V1 and Hover Glide foil of your choice:
Wing Craft V1 Features
+ Compact shape for pumping and direct foil control + Width for early foil release and knee starting stability + Beveled Rails to provide release from the water and bounce back from touchdowns + Bottom SUP handle – Carry your board and foil in one hand, keeping your wing safely separated + Footstrap options for every rider type + Quick release foil track – mount your foil without removing bolts from the pedestal
An well priced board and foil package featuring the Wing Craft V1 and Hover Glide foil of your choice:
Wing Craft V1 Features
+ Compact shape for pumping and direct foil control + Width for early foil release and knee starting stability + Beveled Rails to provide release from the water and bounce back from touchdowns + Bottom SUP handle – Carry your board and foil in one hand, keeping your wing safely separated + Footstrap options for every rider type + Quick release foil track – mount your foil without removing bolts from the pedestal
Hover Glide FPump
The FPump V1 foil unlocks the mysterious self-propelled flat-water foiling possibilities. It glides at the slowest of speeds and requires minimal amounts of energy from pumping to maintain flight.
Hover Glide FCarve
The FCARVE foil will allow advanced foilers to go virtually anywhere behind the boat with full confidence.
This foil flies at impressively low speeds and requires little effort to sustain flight without a power source, allowing you to pick a wave near or far and get to it with complete confidence.
The G 900/710 Lower Package delivers enduring performance that you'll never outgrow. Built for maximum glide efficiency, our medium/high-aspect G Series front wings provide rock-solid stability and plenty of low-end get up and go.
Package Includes:
Phantasm G 900 Front Wing, 710 Fuselage, PS 400 Stabilizer, Hardware (316 Stainless Steel Torx), Neoprene Wing Covers, Carrying Case
G 900/710 LOWER PACKAGE V1
GLIDE / SPEED / CONTROL
The G 900/710 Lower Package includes a carbon-fiber G 900 front wing, 710 mm fuse, and carbon-fiber PS 400 mm rear stabilizer—all fully optimized to deliver the very best in glide efficiency. Our G Series front wings generate significant lift from turning and pumping, and perform across multiple sports categories.
SPECS:
SURFACE AREA (cm2) = 1263 SPAN (mm) = 900 CHORD (mm) = 176 ASPECT RATIO = 6.4
WHY WE MADE IT
We wanted a complete lower package with multi-sport compatibility that included a medium/high-aspect, carbon-fiber front wing that was out-of-this world efficient for gliding and pumping.
WHY YOU'LL LOVE IT
Incredible gliding and pumping performance.
Rail-to-rail stability.
Early lift.
Generate tons of lift from carving.
Multi-sport compatibility.
G 900 FRONT WING
The middle of three sizes in the medium/high-aspect carbon-fiber G Series, the G 900 is all about maximizing glide, pump and drive efficiency. The G 900 strikes a solid balance of glide and turning performance while also generating significant lift from pumping and carving.
PS 400 MM DIRECT CONNECT CARBON REAR STABILIZER
Carbon-fiber stabilizer connects directly to the fuselage. This connection is robust, simple, and perfectly tuned out of the box.
710 MM FUSE
A high-performance, aircraft-grade aluminum alloy fuselage that has been shaped and designed to offer unmatched stiffness and strength.
BIGFOOT CONNECTION
At 50% larger than anyone else, the Phantasm's mast-to-fuse Bigfoot Connection is the strongest and most robust available.
TRAVEL CASE AND NEOPRENE WING COVERS
Transport your entire foil in one low profile, padded case. The Travel Case is designed specifically for easy transport and has lined, cushioned pockets for wings, mast, fuselage, and hardware. This package also comes with neoprene wing covers that are perfect for those quick trips to your local beach.
The G 900/710 Lower Package delivers enduring performance that you'll never outgrow. Built for maximum glide efficiency, our medium/high-aspect G Series front wings provide rock-solid stability and plenty of low-end get up and go.
Package Includes:
Phantasm G 900 Front Wing, 872 Fuselage, PS 400 Stabilizer, Hardware (316 Stainless Steel Torx), Neoprene Wing Covers, Carrying Case
G 900/872 LOWER PACKAGE V1
GLIDE / SPEED / CONTROL
The G 900/872 Lower Package includes a carbon-fiber G 900 front wing, 872 mm fuse, and carbon-fiber PS 400 mm rear stabilizer—all fully optimized to deliver the very best in glide efficiency. Our G Series front wings generate significant lift from turning and pumping, and perform across multiple sports categories.
SPECS:
SURFACE AREA (cm2) = 1263 SPAN (mm) = 900 CHORD (mm) = 176 ASPECT RATIO = 6.4
WHY WE MADE IT
We wanted a complete lower package with multi-sport compatibility that included a medium/high-aspect, carbon-fiber front wing that was out-of-this world efficient for gliding and pumping.
WHY YOU'LL LOVE IT
Incredible gliding and pumping performance.
Rail-to-rail stability.
Early lift.
Generate tons of lift from carving.
Multi-sport compatibility.
G 900 FRONT WING
The middle of three sizes in the medium/high-aspect carbon-fiber G Series, the G 900 is all about maximizing glide, pump and drive efficiency. The G 900 strikes a solid balance of glide and turning performance while also generating significant lift from pumping and carving.
PS 400 MM DIRECT CONNECT CARBON REAR STABILIZER
Carbon-fiber stabilizer connects directly to the fuselage. This connection is robust, simple, and perfectly tuned out of the box.
872 MM FUSE
A high-performance, aircraft-grade aluminum alloy fuselage that has been shaped and designed to offer unmatched stiffness and strength.
BIGFOOT CONNECTION
At 50% larger than anyone else, the Phantasm's mast-to-fuse Bigfoot Connection is the strongest and most robust available.
TRAVEL CASE AND NEOPRENE WING COVERS
Transport your entire foil in one low profile, padded case. The Travel Case is designed specifically for easy transport and has lined, cushioned pockets for wings, mast, fuselage, and hardware. This package also comes with neoprene wing covers that are perfect for those quick trips to your local beach.
The G 1000/710 Lower Package delivers enduring performance that you'll never outgrow. Built for maximum glide efficiency, our medium/high-aspect G Series front wings provide rock-solid stability and plenty of low-end get up and go.
Package Includes:
Phantasm G 1000 Front Wing, 710 Fuselage, PS 400 Stabilizer, Hardware (316 Stainless Steel Torx), Neoprene Wing Covers, Carrying Case.WHY WE MADE IT
G 1000/710 LOWER PACKAGE V1
GLIDE / SPEED / CONTROL
The G 1000/710 Lower Package includes a carbon-fiber G 1000 front wing, 710 mm fuse, and carbon-fiber PS 400 mm rear stabilizer—all fully optimized to deliver the very best in glide efficiency. Our G Series front wings generate significant lift from turning and pumping, and perform across multiple sports categories.
SPECS:
SURFACE AREA (cm2) = 1355 SPAN (mm) = 1000 CHORD (mm) = 171 ASPECT RATIO = 7.4
WHY WE MADE IT
We wanted a complete lower package with multi-sport compatibility that included a medium/high-aspect, carbon-fiber front wing that was out-of-this world efficient for gliding and pumping.
WHY YOU'LL LOVE IT
Incredible gliding and pumping performance.
Rail-to-rail stability.
Early lift.
Generate tons of lift from carving.
Multi-sport compatibility.
G 1000 FRONT WING
The largest of our three sizes of medium/high-aspect, carbon-fiber G Series front wings, the G 1000 is all about maximizing glide, pump and drive efficiency. As the largest of the three G Series wings, the G 1000 has the best glide characteristics.
PS 400 MM DIRECT CONNECT CARBON REAR STABILIZER
Carbon-fiber stabilizer connects directly to the fuselage. This connection is robust, simple, and perfectly tuned out of the box.
710 MM FUSE
A high-performance, aircraft-grade aluminum alloy fuselage that has been shaped and designed to offer unmatched stiffness and strength.
BIGFOOT CONNECTION
At 50% larger than anyone else, the Phantasm's mast-to-fuse Bigfoot Connection is the strongest and most robust available.
TRAVEL CASE AND NEOPRENE WING COVERS
Transport your entire foil in one low profile, padded case. The Travel Case is designed specifically for easy transport and has lined, cushioned pockets for wings, mast, fuselage, and hardware. This package also comes with neoprene wing covers that are perfect for those quick trips to your local beach.
The Converter XR V5 is a versatile all-in-one foil and kitesurfing board built to shred with or without a foil. Based on our popular Sci-Fly XR model, this lightweight convertible foil board offers both versatility and performance.
Package Includes:
Converter XR V5 Board, 3 x FCSII Fins, (Foil Track Hardware not included)
CONVERTER XR V5 5'0"
FOIL / SURF / VERSATILITY
Built with the shape and construction of our popular Sci-Fly XR surfboard, the Converter XR V5 carries on the same high-performance characteristics. The flatter rocker and parallel rail outline deliver top-of-the-line efficiencies both on and off foil. This allows riders to hold down a better edge without a foil and also gives you the speed you need to get on foil. The winged-diamond tail shape provides added grip and pop for strapless freestyle tricks and it also provides added leverage when pushing off the water to get yourself on foil. The Converter XR V5 features our XR construction, which gives the rider the feel and performance of a traditional surfboard in a lightweight package.
WHY WE MADE IT
We wanted the ultimate all-in-one board that sacrificed as little as possible whether you are using it for foiling or for kitesurfing.
WHY YOU'LL LOVE IT
Lighter and higher performance than previous versions
Offers top-of-the-line performance while riding with or without a foil
Can be ridden with any strap configuration or with our Foot Hooks
Freestyle V2 is our dedicated freestyle foil board that comes in 87L and 115L sizes. Now featuring updated foil tracks, plus an inset bottom carry handle to get you in and out of the water with ease. The Freestyle V2 will have you out there riding with style!
Slingshot continues to lead the way in Foil Freestyle with dedicated freestyle board shapes. The new Freestyle V2 is the go-to board for wave sailors, freestylers and any rider who demands a centered footstrap position for full control of both rails. The thick skimboard-shaped outline packs a ton of volume in a compact size. The Freestyle V2 has been updated with foil tracks out the back of the tail for easy foil connect/disconnect. We also added an inset bottom handle to make it easy to carry your whole rig at once. An inboard three-footstrap option provides for controlled wave riding and switch-stance freestyle moves. Opting for the more outboard, four-strap configuration provides great upwind and downwind angles.
WHY WE MADE IT
Our Team demanded a board designed for the latest freestyle foil tricks that also delivered control over both rails for carving swell and riding waves.
WHY YOU'LL LOVE IT
•A compact shape that packs a ton of volume for its size •Inboard and outboard footstrap inserts •Inset bottom carry handle for getting in and out of the water with ease and style •Extended foil tracks continue out the back of the tail, allowing for easy foil connect/disconnect
NEW EXTENDED FOIL TRACKS
Tracks continue out the back of the tail to provide an astoundingly easy foil connect/disconnect.
Hover Glide foil hardware M8 x 40mm Stainless Bolt. For a complete parts list, see the product page for your specific foil. Connects Top Plate to Mast: -FSurf/SUP Foil -Hoverglide.
Hover Glide M8 x 23mm Stainless Bolt foil hardware. For a complete parts list, see the product page for your specific foil. Bolt to secure Mast Cap on Front Wing: -FWind 1 -FWind 2 -FSurf/SUP
Stainless Steel Foil Board Track "T" Nut M8 Thread Sold as 1 each
This is the hardware that slides into the track of Slingshot Foil Boards. They are used to connect Hoverglide and Phantasm foils to Slingshot Foil Boards. Paired with Slingshot Foil Mounting Hardware.
The Travel Craft has been optimized for size and space. We trimmed all the unnecessary size and volume out of this board to make it as compact as possible. The reduce length provides hero-level stiffness and response while the board is under foot. Even though the board is small in size, it is not small in features. Designed with versatility in mind, we made sure to include multiple footstrap insert positions for riders of all styles and abilities. Featuring beveled rails for on-water performance and our new out-the-back foil connect that gets you on the water quicker and easier when you are at your dream location.
WHY WE MADE IT
We built the Travel Craft to make traveling with your foil kit as easy as possible.
WHY YOU'LL LOVE IT
Easily fits in your standard checked suitcase—no need for a "Golf Bag"
Adjustable out-the-back track makes mounting your foil super quick and easy
The smallest and most compact foil board we have ever made
NEW TRAVEL FRIENDLY SIZE AND SHAPE
Developed with the goal of making the smallest and most optimized board for traveling. Easily packs away in a suitcase and provides plenty of performance when you arrive at your destination.
NEW OUT-THE-BACK FOIL CONNECT
To make life easier and get you on the water quicker we added one of our favorite features ever: out-the-back foil tracks! Foil connect/disconnect is now quicker and more delightful than you've ever imagined.
BEVELED RAILS
Beveled rails prevent the board from grabbing the water when you touch down, which allows you to skip off the water and keep going instead of grinding to a halt.
CORDUROY EVA
Super soft EVA features a corduroy texture that provides tons of grip (and is as pleasing to your feet as it is to the eye).
MULTIPLE FOOTSTRAP INSERT POSITIONS
Ride however you want. With multiple insert options you can ride whatever configuration you like: three straps, two straps, one strap, no straps, two hooks, one hook, or no hooks—you can make the choice.
The Dwarf Crafts have set the standard for foil boards. Their compact, nimble, and responsive shape provides riders with one of the most fun and progressive foil boards ever.
Package Includes:
Dwarf Craft V2 Board, (Foil Track Hardware not included)
DWARF CRAFT V2
Nimble / Compact / Control
The Dwarf Craft V2 is the perfect choice for foilers that are looking to take their skills to the next level. Built with a progressive shape and outline, the Dwarfs are one of the most trusted foil boards around. A shorter and wider outline provides great response from the rider to the foil. With chined rails, the Dwarfs stay up on foil when you come in contact with the water while on edge, which makes the boards extremely stable and fun when learning new tricks or dialing in your transitions. The Dwarf Crafts can be ridden strapped or strapless and feature a durable and light weight construction that won't hold you back as you progress from session to session.
WHY WE MADE IT
We built the Dwarf Craft V2 to be one of the most intuitive, performance-driven foil boards on the market.
WHY YOU'LL LOVE IT
The Original Compact Foil Board
Instant reaction and response from rider to the foil
Three sizes for all riders and abilities
CONCAVE DECK
Concave design provides increased turning sensitivity and response, as well as more dynamic heel-toe performance. Also helps with proper foot placement as you get a feel for the contour of the deck and where the sweet spot is.
ADJUSTABLE FOIL TRACK MOUNT
The adjustable mount allows you to slide your foil forward and aft on your board to fine tune how it feels and performs based on your size, ability, and personal preference.
BEVELED RAILS
Beveled rails prevent the board from grabbing the water when you touch down, which allows you to skip off the water and keep going instead of grinding to a halt.
MULTIPLE FOOTSTRAP INSERT POSITIONS
Ride however you want. With multiple insert options you can ride whatever configuration you like: three straps, two straps, one strap, no straps, two hooks, one hook, or no hooks—you can make the choice.
CORDUROY EVA DECK PAD
This full coverage EVA deck pad is the perfect blend of comfort and traction. Its super soft on your feet yet super grippy, ensuring there are no slips, no slides, and no slices.
NOSE LEASH PLUG
Whether you are body dragging, swimming in after the wind has died, or trying to relaunch your kite, this new leash plug helps you keep your board next to you when you need it most.
The Flying Fish V2 is your ticket to prone, wing, kite, wake, and tow-in foiling. The ample width makes getting up and going easy while the durable EPS foam core can take a thrashing. Both Y-strap and offset front foot options allow you to tailor the Flying Fish to your riding style.
Package Includes:
Flying Fish V2 Board, (Foil Track Hardware not included)
FLYING FISH V2
Paddle / Performance / Versatile
A veritable one-board fleet. The Flying Fish V2 is your ticket to prone, wing, kite, wake, and tow-in foiling. The ample width makes getting up and going easy while paddling into waves and makes deep water starts with the wing efficient. The durable EPS foam core with carbon reinforcement in key areas can handle solid impacts strapless or not, having both Tri-strap and offset front foot options allow you to tailor the Flying Fish to your riding style.
WHY WE MADE IT
We wanted a board that would make getting into waves as easy as possible while delivering rock-solid performance once up and foiling. We also wanted this board to help wingers master deep water starts using a wing.
WHY YOU'LL LOVE IT
Picks up waves like magic, letting you focus on the ride
Sufficient width to make deep water wing foiling starts easy
Tri-footstrap and offset front foot options
TRI-STRAP AND OFFSET FRONT FOOT OPTIONS
Strap up The Flying Fish V2 for your personal riding style.
EPS FOAM CORE
Light and Strong.
ADJUSTABLE FOIL TRACKS
Perfectly place your center of lift.
ELONGATED CORDUROY EVA DECK PAD
A comfy ride without the need for wax.
CARBON REINFORCEMENTS
Provides additional support and durability on strategic areas of the board.
The Phantasm 325 Stabilizer is a smaller, faster and more maneuverable stabilizer that is great for smaller riders or anyone looking for higher speeds, snappier turns and a more lively ride.
SPECS:
SURFACE AREA (cm2) = 212 SPAN (mm) = 325 CHORD (mm) = 76 ASPECT RATIO = 5.3
WHY WE MADE IT
We wanted a slimmed-down stabilizer for lighter riders or anyone looking for high speeds, snappier turns and a more lively ride.
The PFI 835 is a high-performance lower aspect front wing that delivers tons of lift, stability, and dynamic performance.
Package Includes:
PFI 835 Front Wing
PFI 835MM FRONT WING V1 (2030 CM2 LA)
STABILITY / VERSATILITY / PROGRESSION
The PFI 835 is a high-performance lower aspect front wing that delivers tons of lift, stability, and dynamic performance. At low speeds, the 835 boasts large amounts of lift and foiling efficiency. The unique inverted gull shape provides a crazy level of dynamic carving control and a self-centering flight that makes foiling both predictable and addicting. The PFI 835 is ideal for foilers in the 175-225lb + weight range. From speeds of roughly 5-15 mph and wave heights of 1-5 ft, This wing is your ticket for all-around surf performance.
WHY WE MADE IT
We made the PFI 835 to provide all around surf foil performance for riders in the 175 - 225lb weight range.
WHY YOU'LL LOVE IT
•The lower aspect profile of this wing helps it fit into the pocket of smaller waves. •Riders can carve and bank turns more aggressively without breaching wingtips or sacrificing overall surface area, low-speed flight and pump-ability.
The Phantasm PFI 928 delivers unrivaled stability, ease of use and rapid progression to all weight classes and riding styles.
Package Includes:
PFI 928mm Front Wing
PFI 928MM FRONT WING V1 (2389 CM2 LA)
EARLY LIFT / LIGHT WIND / PROGRESSION
The Phantasm PFI 928 delivers unrivaled stability, ease of use and rapid progression to all weight classes and riding styles. The PFI 928 is a super early lifting, incredibly forgiving freeride foil with maximum light wind versatility in a lightweight premium carbon construction. It will get riders up and going in the lightest breeze and has the lowest stall speed of any wing in the Slingshot range making it the easiest to ride and jibe.
WHY WE MADE IT
We wanted a wing that would fuel progression and get riders up and foiling with complete control in the lightest of breezes.
WHY YOU'LL LOVE IT
•If you want to progress quickly and ride in the lightest of breeze this is your wing. •The perfect blend of early lift, stability, and ease of use.
The PFI 730 Front Wing is a high-performance lower aspect front wing that gives it tons of lift, stability, and dynamic performance. This combination provides ideal performance for both Surf Foiling and Wing Foiling. It's also a great Kite Foil set up for heavier riders in lighter winds.
Package Includes:
PFI 730 Front Wing
PFI 730MM FRONT WING V1 (1456 CM2 LA)
VERSATILITY / STABILITY / CARVING
The PFI 730 is a polished, refined, and scaled down version of our most popular wing to date, the Infinity 76. At low speeds, it delivers lift and foiling efficiency and at higher speeds you will find better pumping, better jumping with tighter radius carves. All while retaining that shaped-in downforce in the wingtips which prevent you from over-foiling at high speeds. The front wing's unique inverted gull shape provides a crazy level of dynamic carving control and a self-centering flight that makes foiling both predictable and addicting.
SPECS:
SURFACE AREA (cm2) = 1456 SPAN (mm) = 730 CHORD (mm) = 263 ASPECT RATIO = 3.7
WHY YOU'LL LOVE IT
We wanted a faster, better pumping, scaled down and tuned up version of our most popular wing to date, the Infinity 76.
WHY WE MADE IT
•A great multi-use wing that works well and is a favorite across all sports categories. •High top end speed with incredible carving. •Great forward traction when pumping. •Built in downforce in the wingtips that kicks in at higher speeds to prevent overfoiling.
The FCARVE foil is our highest performance and most well rounded package in all of the Hover Glide line with a new higher aspect Quantum 85 front wing. It's the perfect blend of low speed lift, high speed efficiency, overall maneuverability and PUMP-ability.
The FCARVE foil is our highest performance and most well rounded package in all of the Hover Glide line. It's the perfect blend of low speed lift, high speed efficiency, overall maneuverability and PUMP-ability. As the trends point more and more towards high-aspect performance, the Quantum 85 wing delivers all the advantages without sacrificing the low speed lift and maneuverability that make slingshot foils so user friendly and easy to ride. This foil is perfect for riders who already know how to foil and are looking to maximize their foiling performance on the Hover Glide foil platform.
The FCARVE foil was built to deliver high aspect foil performance to the Hover Glide platform. The 72cm mast height places your wings in the heart of the power source behind boats, and the Quantum 85cm wing glides the farthest with the least effort.
WHY YOU'LL LOVE IT
The FCARVE foil will allow advanced foilers to go virtually anywhere behind the boat with full confidence.
This foil flies at impressively low speeds and requires little effort to sustain flight without a power source, allowing you to pick a wave near or far and get to it with complete confidence.
CARBON WINGS AND FORGED ALUMINUM FUSELAGE
Lightweight with a strong, with a stiff and responsive ride.
QUICK CONNECT PEDESTAL BASE
Add or remove the foil from your board in a matter of just a fews seconds without having to completely disassemble foil mounting hardware.
QUANTUM 85 WING
A one-wing quiver that can be used for several sport categories. The perfect blend of higher aspect performance in a user friendly design.
SAFE-T WINGLETS
No sharp foil wings here! Our designers focused the foil wingtips down and away from the rider making a smooth and soft edge that helps prevent injuries. They also provide stability for a predictable ride.
NEOPRENE COVERS & TRAVEL CASE
Transport your entire foil in one low profile, padded case. The case is designed specifically for easy transport and has lined, cushioned pockets for wings, mast, fuselage and hardware. Ala carte neoprene covers have you secure for short and quick trip to the beach.
The WF-1 V3 is our top-of-the-line wake-foil board for advanced and expert foilers. Built using our premium XR carbon-reinforced surf construction, the WF-1 V3 is the lightest wake-foil board we've ever produced.
Package Includes:WF-1 V3 4'2" x 21" x 1.4" Board w/ inserts for footstraps.
The WF-1 V3 is our top-of-the-line wake-foil board for advanced and expert foilers. Built using our premium XR carbon-reinforced surf construction, the WF-1 V3 is the lightest wake-foil board we've ever produced. The board has also been streamlined down to a 4'2" length at 20-inches wide at the belly, eliminating unnecessary material and swing weight, which maximizes the overall efficiency and performance of your foil setup. With carbon reinforcements throughout the tail and foil track, the stiffness of the WF-1 V3 makes for an immediate transfer of energy between the board and the foil, eliminating wasted energy and maximizing your foiling progression.
WHY WE MADE IT
We made the WF-1 V3 to meet the needs of the highest performance foil riders around the world.
WHY YOU'LL LOVE IT
•Extra light. •XR Carbon Construction. •Small size. •Hover farther, pump longer and bank tighter turns than ever before.
Built with the shape and construction of our popular Sci-Fly XR surfboard, the Converter XR V4 carries on the same high-performance characteristics. The flatter rocker and parallel rail outline deliver top-of-the-line efficiencies both on and off foil. This allows riders to hold down a better edge without a foil and also gives you the speed you need to get on foil.
The winged-diamond tail shape provides added grip and pop for strapless freestyle tricks and it also provides added leverage when pushing off the water to get yourself on foil. The Converter XR V4 features our XR construction, which gives the rider the feel and performance of a traditional surfboard in a lightweight package.
The Converter XR V4 is by far the most versatile shape in our range and is the one-board travel quiver for kitesurfing and foiling.
WHY WE MADE IT
We built the Converter XR V4 to be the ultimate all-in-one board for kitesurfing and foiling. We wanted to design one board that sacrificed as little as possible whether you are using it for foiling or for kitesurfing.
WHY YOU'LL LOVE IT
•Lighter and higher performance that previous versions •Offers top-of-the-line performance while riding with or without a foil •Can be ridden with any strap configuration or with our Foot Hooks
Lightweight pedestal base for all Hover Glide Foils. Quick connect your foil to your board without removing the hardware from the board.
Lightweight pedestal base with the ability to connect your foil to your board without removing the track hardware from the board. Quick foil-to-board connection without removing bolts. 4 position options for the bolt. Outer holes are quick connect, inner holes are standard holes.